Nachrichten

Schlüsselkomponenten und Verfahren des Extrusionsgusses Materialzuführung: RohmaterialDer Prozess beginnt mit Rohstoffen, meist in Form von Pellets, Granulen oder Pulver, die ... Read more

HDPE ist ein hochkristallines, unpolares thermoplastisches Harz. Das Aussehen des ursprünglichen Ursprungszustands HDPE ist milchig-weiß und hat einen mikrodünnen Querschnitt ... Read more

Das Gate kann als letzte "Tür" verstanden werden, in die der geschmolzene Kunststoff durch das Gießsystem in die Kavität eintritt, ... Read more

Thermoplastic acrylic resin is a polymer material commonly used in the manufacture of plastic products. It is formed by the polymerization of acrylic monomers, and has excellent UV resistance, chemical resistance, abrasion resistance, and good gloss. Therefore, it is widely used in injection molding, extrusion, calendering and other processes.

The cost advantage: rotational molding process only requires that the strength of the frame is sufficient to support the material, mold and the weight of the frame itself to prevent material leakage of the closed-mold force; and the material in the entire molding process, in addition to the role of natural gravity, almost not subject to the role of any external forces, thus fully equipped with the machine mold processing and manufacturing convenience, short cycle, low-cost advantages.

This guide outlines essential practices to ensure mold stability and operational safety in blow molding processes. It covers stable design, secure installation, regular maintenance, operator training, use of auxiliary devices, and environmental control to minimize risks such as mold tipping, loosening, or accidents during production.

SunOn will participate in the Global Sources Consumer Electronics Show as an exhibitor. We warmly invite you to visit us and meet us there!  more products you may interested in will be displayed!

The product is actually very simple. An antenna is covered with a layer of soft glue. The most important thing in making this type of mold is how to fix the co-plastic parts inside. Due to the limitation of product structure, this product is formed on a vertical machine, and the antenna is placed into the mold by hand. How to place the antenna to ensure that it will not loosen, the simple way is to press it with something. Press it with what?

Mit dem Entwicklungstrend der Automobilindustrie achten Verbraucher immer mehr auf die Verfeinerung und Personalisierung der Innen- und Außenverzierungen von Automobilen. ... Read more